A set of golf cart seat covers in the camouflage pattern including a bottom cover and one or two seat backs designed for specific models of Club Car, E-Z-GO, and Yamaha golf carts. To the right is a picture of the camo seat cover set in the Hidden Creek Marsh vinyl on an E-Z-GO TXT.

--These golf cart seat covers come in 4 camo patterns, two of which are vinyl and two are Cordura fabric.  Both fabrics are waterproof, tough, durable, and pliable.  
--Water easily whisks off the vinyl while the Cordura tends to stay wet longer.
--The Cordura is similar to a canvas fabric.
--The covers are stapled to the underside of the seat. The only exception are the solid Mossy Oak Breakup and the Real Tree Xtra covers in the Cordura fabric. These can come as slip on covers. See this option below.
--The seat covers are made for factory front seats.  If you would like a seat cover for a rear seat, please call Customer Service at 727-487-6615. We will need your measurements of length, width, and depth for both the seat bottom and seat back. There is an extra charge for these special cut rear seat covers of $20 for one tone and $24 for wo tone, and they are not returnable.
--The golf cart seat covers come in four camouflage patterns as shown below.

The Club Car Precedent, Yamaha Drive, and Star Car seats are bigger, and, therefore, the price is higher.

The Cordura camo seat covers do not fit on a Club Car Precedent, Yamaha Drive, or Star Car. The  Cordura fabric does not have enough stretch to be pulled down into the deep seat back dip of these carts.  Therefore, for these models, please choose either the vinyl camo or a two-tone seat cover set in black vinyl with camo. This combination can be made for all makes and models. Below are the camo covers on a Club Car Precedent. Please note, this cart has matching rear seat covers, back arm rests and a camo top cover. For the Precedent or Drive, you would choose the black with camo as offered  below so that the black vinyl is the in the center.  For all other carts you can also choose the camo with black (or other vinyl color, call Customer Service for variations) that places the camo fabric on the outside and the one color vinyl in the center.

Here are two sets of seat covers on a Club Car XRT 4 passenger in the Hidden Creek Marsh pattern. See customer Matt's comments below

Made in the USA.


Testimonial:

""Seats look amazing! Thanks for such good service and quality!" Matt Y. Carrollton, GA., October 2017.

"I purchased Mossy Oak Break Up seat covers and placed a second order for the matching roof top cover. I am very pleased with both purchases: strong, durable, and easy to mount. The seat covers and roof top cover match and look great." Troy H.,  Happy Valley, OR., August, 2016.. 

"We are very happy with the Mossy Oak camo seat covers for our Yamaha G14/G16/G19. They are comfortable, really spruce up the older vehicle, and keep you warm on a cold day." Dave J., Westfield, MA, December, 2015.

"I am very pleased with the seat cover I purchased (E-Z-GO TXT  Real Tree Xtra slip on covers).  Fit perfectly - looks great.  I appreciate the service call.  Will very likely use your company again." Michael G., Chapin, SC., January, 2016.

A complete golf cart front seat set with new marine grade vinyl seat covers in the single or two tone color of your choice. Thee are replacement seats for your golf cart. To the right is a front seat assembly for a Club Car Precedent. If you are also looking for a rear seat replacement, please go to the Rear Seat Kit page.

--The golf cart seat assembly includes the seat bottom and the seat back.
--Seat backs are in one or two pieces to match the original Club Car, E-Z-GO, or Yamaha golf cart design.
--The seat assembly includes the polyethylene foam, plywood backing, T-nuts, and vinyl seat covers.
--The seat covers are in a single color. We can replicate the original golf cart color and offer other colors such as black, red, or gray seats. Please call Customer Service if you have a special color request, 727-487-6615.
--A thicker and more heavy duty commercial grade vinyl is also available for the single color white or the off white tan, buff or beige vinyl covers. This seat cover also follows the factory design and has no seams. Please see this option below.
--The seat covers can also come in a two tone pattern. Because the two tone seat covers are all custom made, there are no returns on these seat replacement covers.

--The seat assembly does not include hardware or arm rests. You would use the original golf cart hardware.
--The seat assembly does not include a back rest back cap or cover. You would use the original seat cap. The only exceptions are the Precedent, Drive and Star.  See below for an explanation
--The front seat assembly weighs 40 lbs.
--The seat dimensions match the original factory dimensions.
--The Club Car Precedent, Yamaha Drive, and Star seats are larger than most other golf carts which is why they cost more. Also our assembly includes back caps for  these carts.
 
We can make a golf cart rear seat replacement assembly kit to match the front seat replacement kit if you would like to replace your existing rear seat cushions..  Please call Customer Service, 727-487-6615.  We would need the dimensions of both the rear seat bottom and seat back.  If your rear seat dimensions are different than the front seat, an extra $20 is charged for the golf cart rear custom seat in a single tone and an extra $24 is charged for a two-tone custom rear seat.  Also, you can add a new rear seat kit, either fold down or stationary, at the same time as replacing your front seat. This would be ordered separately on the Rear Seat Kit page.

Please contact Customer Service if you are interested in only the wood, foam, and T nuts and not the seat cover. 727-487-6615.

See below if you do not want the complete golf cart seat assembly, but rather only want the seat bottom or one or two seat backs.

Below is a customer's new front seat assembly replacement on an old style Club Car in the Club Car Buff color. This cart also has our Club Car fold down rear seat.

Below is the seat replacement assembly in the camouflage Hidden Creek Marsh pattern on an E-Z-GO TXT.


Below is a picture of a two tone black with white golf cart seat cover on an E-Z-GO TXT and a black with green seat cover on a Club Car Precedent golf cart.

.

Please allow 4-6 weeks for shipment of these custom made front seat replacements.

Made in the USA.

A golf cart padded armrest cushion with a drink holder for a rear seat or a front seat that has a flat surface on the hip restraint.

--The universal armrest cover fits most golf cart rear seats.
--Is a set of two.
--The length is 17" and the cup holder diameter is 3".
--Covered in vinyl.
--Colors to match the Club Car, E-Z-GO and Yamaha tan, beige, and buff colors of your seats.
--Custom colors are available as well as two-tone colors. Call Customer Service for these combinations. 727-487-6615.
--Piping can be added at the edge seam in the same or a contrasting vinyl color.
--Comes with all the mounting hardware.
--Requires the drilling of holes using a 5/16" drill bit.
--Will work on square arm supports or round tubular arm supports.
--Facing front or facing back placement is by personal preference.
--The golf cart armrest kit includes an installation guide and hole template.

Below is a sample of some of the colors and the armrests in Hidden Creek Marsh camouflage. See the camo color chart on the Camouflage products page.




Below are the armrests on a Club Car DS rear seat kit

Below are the arm rests in two tone vinyl with a contrasting pipping. Very elegant!

>

Made in the USA.

The universal camouflage golf cart top canopy cover simply slips on over your existing golf cart roof.

--These golf cart top covers are made out of Cordura or vinyl fabrics.  These fabrics are waterproof, tough, durable, and pliable.  It is similar to a canvas fabric.
--The covers are made to slip over existing golf cart tops.  These covers are secured with Bungee cords sewn into the hem of the cover to ensure a tight fit.
--The top covers are made for standard top lengths of 53"/56" and for the extended top length of 80".
--The top cover can be easily removed after hunting season is over.
--The golf cart canopy covers come in four camouflage patterns as shown below.

Please allow 2 weeks to ship the top cover. Also, the top covers are not returnable unless there is an issue of workmanship.

Made in the USA.

This radio sound stereo system in on sale only for Spring 2019 for $325 complete.  See below for the ordering information.

A complete marine-grade sound stereo system for your golf cart including a Pioneer radio, CD player, satellite radio, built in speakers and antenna, and a water tight console with a dust-protective radio shield.  Our many customers say the system has absolutely great sound!

The compact radio console mounts overhead under the golf cart top. It is a turn-key sound system that takes only one hour to install. There is a link to the installation instructions below.

To the right is the golf cart radio stereo system mounted on a Tomberlin E-Merge golf cart. This is a universal radio stereo system that fits to the underside of most golf cart roofs including the popular Club Car, E-Z-GO, and Yamaha golf carts. The mounting foam pad allows the console to be mounted to tops with different contours and ensures a tight fit. lt also cushions the radio when driving over rough terrain. This mounting pad is included FREE with the radio system.

FREE Mounting Pad.

--The DEH Pioneer radio is a 50 watts x 4, 200 total watts MOSFET CD player with an AM/FM tuner with a 3 band equalizer.
--Compared to conventional power supplies, the MOSFET amplification circuit is smaller and more efficient, and it delivers power with less distortion. This means the music in your golf cart will be cleaner at higher volumes.
--The kit includes a high quality built in AM/FM antenna.
--The speakers are "Aquavibe" 80 watt coaxial speakers.
--MP3 playback with volume and memory settings.
--Connect your portable devices directly through the front AUX input.
--Satellite Radio Ready for XM or Sirius through the front AUX input.
--iPod or MP3 through the front AUX input.
--Card remote control to activate the golf cart sound system.
--Detachable face security for the radio.
--The radio stereo system comes within a black compact console ready for overhead mounting.
--The overall dimensions of the console are: 18" length x 8.5" width x 5" height. This is the most compact overhead golf cart console available.
--A universal fit for all golf carts including Club Car, E-Z-GO, and Yamaha golf carts. Longer bolts are provided for tops that have a dome shape like the Star Car.
--The compact unit comes with complete installation instructions. See below for a link to these instructions.
--The console is bolted to the golf cart top and uses self-sealing neoprene washers to prevent roof leaks. In order to accommodate many roof shapes, three lengths of bolts are provided. You choose the length that fits with your golf cart top.
--A weather resistant ABS mobile console housing is built tough using the latest injection molding technologies to provide a durable design.
--The marine speakers are water, UV, and corrosion resistant and have a one-piece molded grill for speaker protection and durability.
--The stereo package does not include a Voltage Converter to convert from 12 volts to your golf cart battery bank voltage. The Voltage Converter is listed as a separate product below.
--The sound system works with golf cart gas engines that have a 12 volt operating system.
--Please be advised that, for electric golf carts, the motor generates an electric field that is the same frequency as that of the AM radio. Hence, when the electric golf cart is under way, a static interference may prevent the radio from receiving a clear AM signal.

A foam pad is included as a FREE addition to improve the effectiveness of the console installation. This allows for a tighter fit for dome-shaped tops such as the factory tops for the Club Car Precedent, E-Z-GO RXV, Yamaha Drive, Star Car, and the Tomberlin E-Merge golf carts. Also, the foam lessens vibration to improve sound. The foam is cut to fit the exact dimensions of the console.





The stereo sound system comes with a one year 100% manufacturer's warranty. Comes with all hardware and installation instructions. See below for pictures of the Pioneer radio, console, and speakers.

A quick release universal gun rack for your golf cart. An essential accessory for all hunting utility vehicles.

--Fits on all golf carts including Club Car, E-Z-GO, Bay Boy Buggy, Stealth, Yamaha and UTV's.
--The gun rack dimensions are 30 1/2" x 2" x 1".
--The rack is removable from the 9" x 6" gun rack base.
--The gun rack is free standing, and the neck is adjustable.
--The gun rack holds two guns in the golf cart with 1" straps secured by Velcro.
--The rack is made black powder coated steel.

One year warranty on the golf cart gun rack.

Below is a close up on the gun rack strap.